Showing posts with label LTE-Advanced. Show all posts
Showing posts with label LTE-Advanced. Show all posts

Saturday, April 30, 2011

LTE-Advanced Training

3GPP Release 9 expands the functionality of Release 8 as well as laying solid foundations for LTE-Advanced. 3GPP proposed LTE Release 10 & beyond (LTE-Advanced) as a candidate for IMT-Advanced which has been accepted by ITU. The new capabilities of LTE-Advanced is envisaged to handle a wide range of supported data rates with target peak data rates of up to approximately 100 Mbit/s for high mobility and up to approximately 1 Gbit/s for low mobility. In comparison to LTE, LTE-Advanced is wider than approximately 70 MHz in DL and 40 MHz in UL.

Who Should Attend
Telecom developers, testers, managers and operational
engineers involved in LTE & LTE-Advanced technologies.

Objective
After completing this course, the audience will be able to:
Understand history & overview of LTE-Advanced
Define LTE-Advanced Requirements
Explain LTE-Advanced Features
Describe LTE-Advanced Air Interface Enhancements
Explain LTE-Advanced Procedures


Course Contents

LTE-Advanced Overview
• History & Evolution
• Need of LTE-Advanced
• High Level Requirements
• LTE-Advanced Spectrum Allocation
• Overview of LTE-Advanced Features

Network Architecture Enhancements
• LTE R8/R9 Architecture
• HeNB Evolutions – LIPA/SIPTO
• Extended H(e)NB Features
• Relays for LTE
• Self-Organizing Networks (SON) Evolutions
• Network-Based Positioning

E-UTRA Evolutions

• Carrier Aggregation
• Enhanced Downlink Multiple Antenna Transmission
• Uplink Multiple Antenna Transmission
• LTE Spectrum Enhancements
• Latency Reductions

Operations & Deployments

• HeNB Mobility Enhancements
• Attach & Bearer Setup in LTE-Advanced
• Mobility in LTE-Advanced
• LTE-Advanced Interworking
• Migration to LTE-Advanced

Course content details are available in NgnGuru Training Catalog. For more information please send us a message or send an email to support@ngnguru.com.

Sunday, February 6, 2011

4G Mobile Broadband Evolution: 3GPP Release 10 and Beyond - HSPA+, SAE/LTE and LTE-Advanced

4G Americas white paper provides detailed information on the status of IMT-Advanced, on 3GPP Rel-10 including HSPA+ enhancements and the introduction of LTE-Advanced, and the planning for Rel-11 and beyond.

Additional information on Rel-9 is included in Appendix B and includes a complete update to Section 6 of the 3G Americas white paper, 3GPP Mobile Broadband Innovation path to 4G: Release 9, Release 10 and Beyond-HSPA+, LTE/SAE and LTE-Advanced, which was published in February 2010 (and therefore did not contain some additional changes to the standards before their publication in March 2010). This paper has been prepared by a working group of 4G Americas' member companies and the material represents the combined efforts of many leading experts from 4G Americas’ membership.

Download white paper

Wednesday, December 22, 2010

Next generation LTE, LTE-Advanced or LTE Rel-10 is the next step in radio access technology

Whatever the name – next generation LTE, LTE-Advanced or LTE Rel-10 – the next step in LTE evolution allows operators to introduce new technologies without putting existing investments at risk.

LTE radio access technology is continuously evolving to meet the requirements of regulators, operators and users. The first fully commercial and operational 4G mobile broadband systems, currently being deployed, are based on the first release of LTE, 3GPP Rel-8, which was finalized in 2008. Rel-9, finalized at the end of 2009, added support for broadcast/multicast services, positioning services, and enhanced emergency call functionality, as well as enhancements for downlink dual-layer beam forming.

Authors : Stefan Parkvall, Anders Furuskär, Erik Dahlman

Download Ericsson Article

Sunday, December 12, 2010

Carrier Aggregation for LTE-Advanced

To meet LTE-Advanced requirements, support of wider transmission bandwidths is required than the 20 MHz bandwidth specified in 3GPP Release 8/9. The preferred solution to this is carrier aggregation. It is of the most distinct features of 4G LTE-Advanced. Carrier aggregation allows expansion of effective bandwidth delivered to a user terminal through concurrent utilization of radio resources across multiple carriers. Multiple component carriers are aggregated to form a larger overall transmission bandwidth.

3GPP specifies carrier aggregation in LTE as following

  • Rel-8/9 backward compatible carriers are the basic building blocks and to be supported
  • Rel-10 signalling to support aggregation of up to 5 DL of component carriers and 5 UL of component carriers, irrespective of intra- or inter-band Carrier Aggregation (CA).
  • Rel-10 to support both intra- and inter-band aggregation for both DL & UL in FDD
  • Rel-10 to support inter-band aggregation with different signal reception timings across of component carriers of different bands for FDD DL
  • UE-specific asymmetric number of component carriers in DL and UL
  • Component carriers can have any of the bandwidths supported in Rel-8

Contiguous & non-contiguous carrier aggregation

Two or more component carriers can be aggregated to support wider transmission bandwidths up to 100 MHz. Spectrum deployment can be either contiguous or non-contiguous. Support for carrier aggregation feature requires enhancement to the 3GPP LTE Release 8 & 9 physical, MAC, and RRC protocol layers. To an LTE Release 8 terminal, each component carrier will appear as an LTE carrier, while an LTE-Advanced terminal can use the total aggregated bandwidth.

source: LteWorld

Friday, June 18, 2010

Qualcomm Webinar: LTE Advanced

This Qualcomm webinar was presented last month, it examines LTE Advanced and provides a high-level view into how it helps operators make the next performance leap.

Qualcomm Webinar: LTE Advanced

Saturday, May 29, 2010

LTE Release 10 and Beyond (LTE-Advanced)

A very informative 3GPP presentation, Radio Access Networks - LTE progress report, May 24, 2010, Takehiro Nakamura, 3GPP TSG-RAN Chairman

See a snapshot below
From LTE

source: LteWorld

Thursday, April 1, 2010

What is LTE-Advanced?

The ITU has coined the term IMT Advanced to identify mobile systems whose capabilities go beyond those of IMT 2000. In order to meet this new challenge, 3GPPs Organizational Partners have agreed to widen 3GPP’s scope to include systems beyond 3G.

In 2008 3GPP held two workshops on IMT Advanced, where the “Requirements for Further Advancements for E-UTRA” were gathered. The resulting Technical Report 36.913 is now published (June 08) and a liaison was sent to ITU-R covering the work in 3GPP RAN on LTE-Advanced towards IMT-Advanced.

Why “Advanced”?

The ITU has coined the term IMT Advanced to identify mobile systems whose capabilities go beyond those of IMT 2000. In order to meet this new challenge, 3GPPs Organizational Partners have agreed to widen 3GPP’s scope to include the development of systems beyond 3G.
Some of the key features of IMT-Advanced will be;
  • Worldwide functionality & roaming
  • Compatibility of services
  • Interworking with other radio access systems
  • Enhanced peak data rates to support advanced services and applications (100 Mbit/s for high and 1 Gbit/s for low mobility)
LTE-Advanced Requirements

In 2008 3GPP held two workshops on IMT Advanced, where the “Requirements for Further Advancements for E-UTRA” were gathered. The resulting Technical Report 36.913 is now published.

General requirements for Advanced E-UTRA and Advanced E-UTRAN states that Advanced E-UTRA and Advanced E-UTRAN shall be an evolution of Release 8 E-UTRA and E-UTRAN. Further, Advanced E-UTRA and Advanced E-UTRAN shall meet or exceed IMT-Advanced requirements.

As per requirements Advanced E-UTRA should support significantly increased instantaneous peak data rates. At a minimum, Advanced E-UTRA should support the key feature of IMT-Advanced which is stated in the Circular Letter from the ITU-R as "enhanced peak data rates to support advanced services and applications (100 Mbit/s for high and 1 Gbit/s for low mobility were established as targets for research)". The system should target a downlink peak data rate of 1 Gbps and an uplink peak data rate of 500 Mbps.

The overall C-Plane/U-Plane latency shall be significantly decreased compared to EPS Rel-8.
Over all 36.913 specifies a number of more requirments in the areas of System performance, Deployment, E-UTRAN architecture and migration.

See LteWorld link to know more about LTE-Advanced.